|
Post by TomyJ on Dec 10, 2018 20:06:29 GMT -5
Maybe this will be my last RT build? 1/4 scale model, side by side seating, possible front engine or FWD?
|
|
ahweh
New Member
Posts: 48
|
Post by ahweh on Dec 11, 2018 17:51:32 GMT -5
What kind of tubing is that you are using for your model?
|
|
|
Post by davej98002 on Dec 11, 2018 17:52:26 GMT -5
Clear Plastic! Painted blue. . . . . . . . . . . . . . Just for mock up, not for street use.
|
|
|
Post by TomyJ on Dec 11, 2018 20:22:35 GMT -5
What kind of tubing is that you are using for your model? Hi Ahweh, The square acrylic plastic is 5/16 square, The scale of the model is 1/4 so I will be using 1.5"x .090 wall square steel tubing because the IFS control arms is about this size. I can not use CAD like some of these guys so I rely on graph paper, BUTT I can only draw in 2D and I need to see what this is going to look like in 3D, so I built the 1/4 scale model, I have no access to a lumber yard like some people. (No offense Admin, heeheehee)
|
|
ahweh
New Member
Posts: 48
|
Post by ahweh on Dec 12, 2018 4:45:00 GMT -5
If you want CAD help I might be able to help you out right now because I am on a trial of a pretty powerful cad program that I might get a subscription to.
You can message me George Thompson on Facebook.
Yo can't miss me as my avatar picture is me in chainmail armour with a sheild.
|
|
|
Post by TomyJ on Dec 12, 2018 12:27:59 GMT -5
If you want CAD help I might be able to help you out right now because I am on a trial of a pretty powerful cad program that I might get a subscription to. You can message me George Thompson on Facebook. Yo can't miss me as my avatar picture is me in chainmail armour with a sheild. Thank You, Do you train wild cats?
|
|
ahweh
New Member
Posts: 48
|
Post by ahweh on Dec 12, 2018 22:33:49 GMT -5
I have 7 cat's but I feel they do most of the training.
When the picture was taken I was a part of a medieval recreation group in the mid 1980's thus the armour.
Now I just teach a generic hack and slash styke of swordsmamship.
Are you interested in taking me up on my offer because I think there is a free viewer you can get for the Cad program I use.
There is also a relativly low cost tube bending program I found that you might want to look into.
|
|